Made at home lighting wall, the so-called point-lights. And the spotlights - it is built halogen lamp with reflector type JCDR, and with a base GU5.3. We have been calculated on the lamp 12B, for reasons of safety, for 220 all the same dangerous strain. But to connect the tubes for 12 v requires a special scheme to connect halogen lamps with a transformer to power halogen lamps that converts 220v to 12 volt. However, for some reason burned for 2 transformer, although the tubes were connected to it in the sum on the 120w, and the transformer was designed for 150-200 watts. Вобщем, last burned transformer was the last straw of patience. It was decided to alter the wiring under the halogen bulb 220V, because the transformers are a little more than a set of halogen lamps at 220 volts. Yes, and chuck a halogen lamp that for the same 12 that for 220 volts. The store was spotted halogen bulb Navigator on 75 watts, and it was decided to try it in use. As a result, we were afraid to put it into the wall. The reason - a very high heat, it is virtually a small stove. After 5 minutes of work there is the smell of wires that fit in the tube, indicating that a decent heating, and high fire risk. Later we decided to search or LED lamps for 220V, or take on the halogen 50w or 35w, although the brightness will be smaller.
Halogen bulb Navigator - Response:
* Halogen bulb. Use for lighting.
* JCDR type reflector halogen
* Power 75 W
* Diameter 51 mm
* Cap GU5.3
* 230V
* Site of the manufacturer: www.navigator-light.ru
* Manufacturer - China, packed (as barcode ) in Russia.
Comment