Many car enthusiasts love to their car look good. Overall lights of cars, or rather the front parking lights on most cars have one feature. If the lights are shining pure white light, the color marker lamps stands on their background, giving the yellow light of headlamps. That if the lamp size is combined in a single reflector with a beam headlamps. And if the light bulb sizes are in a separate module, usually beam or a separate lamp, then certainly you can see how different color dipped headlights and dimensions. When using incandescent lamps, this problem is not so relevant, although they are still there, but when using xenon problem was more acute, because the whole "beauty" of xenon spoiled yellow dimensions 
Recently, the problem is successfully solved if implemented simple replacement lamp dimensions to LED lamps. LED marker lights, until recently, had one problem - blue. Traffic police officers can stop you and tell you the color mismatch marker lamps, because the blue marker lights are not allowed SDA, allowable colors - white and yellow. Usually in such cases can prove that they are white but it is unnecessary problems. The problem is that cheaper LEDs have a blue hue. More expensive are generally white. Plus, an LED can not always shine brightly enough. Some craftsmen managed to collective self-LEDs in size, but it is not easy and not everyone can.
On the recommendation of friends decided to buy and try Sho Me LED dimensions for which the price is not very low, but as I was assured, they are fun. Of course, skirting W5W more common than T4W, therefore, failed to immediately and quickly find these lamps, but still I found them and bought them. Staged - and was very pleased. In pure white light bulbs dim light is not visible yellow color marker lamps. Of course, if only to stand with the included dimensions, the small bluish tint still there, but because they were designed for use with xenon, against which they would not stand out. LED size, which I tried earlier, were more blue tint. Lamps shine brighter than usual marker lamps. In total, I can say that I liked it, and I ride with them for quite a long time.
LED lamps marker lamps * SHO ME
Model: BG-0505 LED
Voltage: 12v
Power: 5w
Brightness: 30 lm
Manufacturers: Maksilyuks
Country of Origin: Korea
Lifetime: 30000 hours
Angle of emission: 120 degrees.
Many people probably still remember how in pre-perestroika times were special "blue" bulbs, which could treat various diseases. I also remember those lamps, but a little vague. Вобщем saw here in the store a light bulb, called "Doctor" and I was beginning to worry, my innate curiosity, and I had to buy the blue lamp, since the price is not more expensive than conventional lamps. Such therapeutic blue light is designed for physical therapy purposes - that is basically warm painful areas - nose, ear, throat, etc. To my disappointment, I was very sick a cold and very rarely, so we will wait for the whole family, when someone would catch cold, to make warming up a blue lamp In general, a little saddened by the fact that this kind of medical hsin lamp, but the package is not even a minimum instructions on how and what it can be treated. In the meantime, the use of blue lights will be on his own intuition - that is to say that will dig up the internet on this subject
Lamp blue "Doctor"
Manufacturer: Kalashnikov
Production: Russia, Tver region, pos. Kalashnikov.
Cap: E27
Voltage: 220 Volts
Power: 100W
Manufacturer Website: www.kelz.ru
More information about the tubes of blue light on the manufacturer's website: Incandescent medium sized blue
I'll continue my "test" and other halogen lamps for the home. At this time in my test were lamps of smaller diameter, with cap MR11, because the devil pulled us to ceiling halogen lamps at different walls with different cap. This choice was motivated enough vague grounds, ostensibly because large size lamp MR16 (socket G5.3) have more power, and are heated more strongly, although brighter, and therefore on the wall, where it is necessary to make it light, we do 35 watt lamps MR16, and where only decorative lights, there have lamps rated 20 watts, but the MR 11. Now here are thinking, why all this should have been? But to alter the ceiling is no longer hunt, so you have to pick up the lamp of the reduced format. Then, when we did, we still had no idea that halogen spotlights can choose almost any of brightness and power, but the choice then was not so great, why have there something like that. Generally, as I remember, before halogen lamps for point lights were on 12 v, and there are now a normal halogen lamp at 220 volts, so you should also change the wiring, because the transformer thing is not very reliable - and are heated and lit. In addition, the transformers still question whether they will work with dimmers, but the lamp will operate at 220V. Compared with energy-saving, and led lamps, halogen lamps are pleased only price. So our choice - halogen lighting, and more precisely point recessed halogen lighting. But, because saving is not, and warming themselves, they are very good - too powerful to put dangerous if ventilation is inadequate.
This time I bought a test tube with the following characteristics:
Halogen MR11
Power: 35 W
Power: 220
Manufacturer: Russia, Elektrostandard
Works with a dimmer
Clear glass
UV filter
You love to get up at night, and wander around the house in the dark, looking at the touch light switch, and then wincing at the bright lights go on? I do not like. And have long appreciated the advantages of using lamps - the lamp, when and where you go see, and much electricity do not overpay. But the Chinese fluorescent lamps lighting fixtures is one feature. They burn out. Sooner or later. Although, in general fluorescent lamps in general have the disadvantage that at high humidity lamps gradually darken from one corner, and then just burn out. It is for this lamp, installed in the bathroom have to be changed more often than others. Therefore, in the last campaign on Castorama had to buy a night light lamp manufacturer PHOENIX. Incidentally, these nightlights somehow serve longer than those the same noneym, or brand Cosmos . And shine way too better. That is why I have nearly all night-the house was replaced them. And they burn way too much rarer, I too have noticed On the night light is the way the switch, so always embed-removed from the socket it is not necessary. It is a pity that did not make the night-light with light sensor, so they switched off in daylight. Certainly night-light with sensors, but they are simple, not fluorescent, and the power they have 7 watts, and the light is not very much. The reason for this is that fluorescent lamps do not work with light sensor, dimmers and motion sensors. That is, in principle, it can be done, but it will be much more expensive, so this has yet to do.
Features lamps lighting:
Operating voltage: 220V, 50-60Hz
Power consumption: 1W
Glow color: Green
Manufacture: China
An epic selection of lamps in the wall continues Once in a sample was purchased LED energy saving lamp , it seemed to me that still gives light blue tint, which is not very pleasant. It turns out that like office light - cold. I prefer a warmer light. Recently BauCenter was seen brand products Elektrostandard , which appears and advances on the Russian market BauCenter. Compact fluorescent energy saving lamp, as the inscription on the packaging is a yellow light of 2700K, which is home made me very happy. It was bought by a lamp on the sample.
In general, the use of energy-saving bulbs is as it seems to me a compromise between the LED - a very expensive, and halogen - cheap but not cost-effective. The only disadvantage of energy-saving lamps, which is inherent in the fluorescent lamps - the inability to work with dimmers and motion sensors. They just burn through some time - I discovered this on their own experience That is why I have a sensor is low power, but the halogen lamp. Power fluorescent lamps halogen lower, but above the LED, but the brightness of the LED weaker fluorescent lamp, which shines almost as well as halogen. So what better energy-saving lamps specifically for you, have to decide for you and your wallet.
Generally speaking, often to connect a power-saving lamps to the network requires a special circuit for fluorescent lamp, which makes the "start" lamp. This energy-saving lamp has model MR16 - the first I saw, in which the "starter" built into the lamp, and redo the wiring for installation of the lamp is not required.
Characteristics of fluorescent lamps:
Socket: G5.3
Light: yellow (temperature 2700K)
Brightness: 300 lumens
Power: 11 Watts
Power: 220 V, 50-60Hz
Model: MR16
Service life: 8000 hours
Production: It's like Russia. Under the supervision of German Elektrostandard
